LVT Flooring

A step-by-step guide for laying click vinyl flooring.
Click vinyl flooring is a versatile flooring option that is reasonably straightforward to install when compared to other flooring kinds. It does take some skill and effort, but with this instruction on how to lay click vinyl flooring, anyone can do it!
What is Click Vinyl Flooring?
Vinyl flooring, often known as LVT flooring, is made mostly of vinyl and comes in planks or tiles. It is often a multilayered product with a transparent wear layer, an aesthetic layer containing the pattern and color, and a core layer. Some LVT flooring also has an underlay layer or backing.
Click vinyl flooring is a floating floor that may be placed without the use of adhesive. Instead, the tiles or planks simply lock together, and by allowing a small expansion gap between the tile’s wall and outlet layers, the floor will expand with heat to fill the hole and stay in place.
Preparing the subfloor
Your subfloor must be in excellent shape, and while the value of underlayment in LVT is debatable, preparing your subfloor is not. If your subfloor is uneven or filled with debris, the click LVT flooring may fail to install properly or warp over time.
First, remove any furniture from the room so that the floor is clear. Second, ensure that your subfloor is clean by dusting and hoovering it to remove any material that may cause the planks to be uneven. Next, verify the subfloor’s leveling. Ideally, it should be within 3/16-inch of 10 feet. If you discover uneven patches above or below this threshold, you’ll need to employ a self-leveling solution.
Planning and Layout
You should not begin installing your click premium vinyl flooring without first considering and layout considerations. Many homes have irregular-shaped rooms, and with time, walls can become bent, affecting installation.
Create a starting point for your flooring that is square with the room. I recommend measuring the length of each wall and determining how much floor space you need to cover. This tells you how many tiles or planks you need. You may also observe if any cuts are needed to accommodate the last rows.
Removing Skirting Boards
You cannot install vinyl flooring without first removing the border boards. This is because you need to be able to view the walls so that you can properly lay the tiles or planks and get the needed expansion gap.
To remove baseboards or skirting boards, use a flat instrument such as a chisel. They should be prised away with a light push, but be delicate to prevent snapping them or harming the material with the instrument.
Installing Click Vinyl Flooring.
You can start laying the first row of click LVT flooring once you’ve determined the rough plan and amount. It is critical to begin from one corner and wall of the room and complete the first row perfectly. If you mess up the first row, it will cause problems for the rest of the installation.
You must always follow the manufacturer’s instructions (for example, Amtico’s Click Smart range), which should include general suggestions for attaching the tiles and arranging the first row. This often entails scoring and cutting the tongue from the first row and putting it against the wall while keeping the recommended expansion gap.
The following row must be staggered by at least 6 inches so that the ends of the tiles or planks do not align row to row. Typically, this implies cutting and shortening the first tile in the second row.
The click LVT flooring is then simply laid row by row. Maintain the expansion space between the wall and the outer tiles as you progress.
Finishing Touches and Maintenance
The final row can be difficult because it sometimes needs cutting lengthwise, but the tiles are normally simple to cut after an initial scoring to penetrate the vinyl.
Once the entire floor is placed, double-check your work to ensure that there is still an adequate expansion gap. Also, inspect the interlocking of the planks or tiles to ensure that they are all flat and correctly attached.
Once you’re satisfied with the installation, you can reinstall any skirting boards that you removed earlier.
Install Click Vinyl Flooring as a DIY Expert.
I hope you found this tutorial to installing click vinyl flooring useful. If you are confident, you can save money on installation charges and complete the task yourself. The process requires patience and planning, but as long as you prepare your subfloor, follow the manufacturer’s directions, and have the first row correctly set, your click vinyl flooring should look great!

LVT Flooring